UDN2987A-ALLEGRO(DIP20), IC-DIP-OCTAL PERIPHERAL DRIVER(DIP20), , IC

Product Details

UDN2987A

Manufacture:ALLEGRO

Description

Providing over-current protection for each of its eight sourcing outputs, the UDN2987A and UDN2987LW drivers are used as an interface between standard low-level logic and relays, motors, solenoids, LEDs, and incandescent lamps. The device includes thermal shutdown and output transient protection/clamp diodes for use with sustaining voltages to 35 V.

In these drivers, each channel includes a latch to turn OFF that channel if the maximum channel current is exceeded. All channels are disabled if the thermal shutdown is activated. A common FAULT output is used to indicate either chip thermal shutdown or any overcurrent condition. All outputs are enabled by pulling the common OE/R input high. When OE/R is low, all outputs are inhibited and the eight latches are reset.

Under normal operating conditions, each of eight outputs will source in excess of 100 mA continuously at an ambient temperature of 25°C and a supply of 35 V. The over-current fault circuit will protect the device from short-circuits to ground with supply voltages of up to 35 V.

The inputs are compatible with 5 V and 12 V logic systems—TTL, Schottky TTL, DTL, PMOS, and CMOS. In all cases, the output is switched ON by an active high input level. The UDN2987A is supplied in a 20-pin dual in-line plastic package; the UDN2987LW is supplied in a 20-lead small-outline plastic package.

FEATURES

350 mA Output Source Current

Over-Current Protected

Internal Ground Clamp Diodes

Output Breakdown Voltage 35 V, Minimum

TTL, DTL, PMOS, or CMOS Compatible Inputs

Internal Thermal Shutdown

Automotive Capable

Šifra: 23287

Količina: 1

Kataloški brojevi:

Zamjena: